Roshera

Blog

Engineering notes from building a geometry kernel that checks its own work. Each post is about one real problem, with the numbers.

2026-11-19When a seam is not an edgeA profile sampled into 160 facets drew 160 lines across the part. Here is the rule that keeps a faceted surface's outline and drops its seams. 2026-11-19The part that vanished on reopenAn agent built a wing rib; after a reload the document came back without it. The cause was two sequence counters in one history, and the fix is a lesson about event-sourced CAD. 2026-11-19An aerofoil is stated by its ordinatesA chord and a depth do not let a machinist make an aerofoil. Roshera now measures the profile's ordinates from the solid and puts them on the sheet, certified. 2026-11-18A DXF that opens right in other CAD toolsMillimetres that read as inches, circles as polygons, a white sheet, 3,600 objects. What it took to make a drawing's DXF open properly elsewhere. 2026-11-17A drawing that checks its own numbersEvery value on a Roshera sheet is re-measured against the solid. Here is what the sheet certificate checks, and what it refuses.