- 01 · todayDescribeWords, a spec or a STEP file
- 02 · todayBuildNative B-Rep, recorded as history
- 03 · todayCertifySound solid, with the measurements
- 04 · todayDrawProduction drawing, re-measured
- 05 · building nowMeshMeshes traced to their faces
- 06 · building nowSimulateStress, heat, flow on the real part
- 07 · building nowImproveResults feed the next design step
Real recordings, not renders.
Screen recordings of Roshera at work this week, sped up. Nothing staged: what the agent said and what the kernel checked is what you see.
CAD you can delegate, because the kernel proves every step.
For forty years CAD has trusted the person driving it to check by eye. AI designs faster than anyone can check. Roshera moves the checking into the geometry engine: every solid certified, every number on a drawing re-measured, every tolerance verified on the real faces, and anything it cannot verify refused.
From a sentence or a STEP file to a drawing the shop can use.
Roshera is a geometry kernel with its own drawing bench and design history. Engineers work in the app; AI agents use the same commands and the same checks.
A drawing that disagrees with its part costs a scrapped batch.
Most drawing tools print what they were told. Roshera prints what it measured, says what it left out, and refuses to release a sheet that no longer matches the part.
Simulation that feeds back into the design.
The next stage closes the loop: mesh the certified part, simulate it, and turn the result into a change the kernel can make and check, with every result traced to the face that caused it.
- Part
- Mesh
- Simulate
- Feedback
- Improve
Illustration of the loop we are building. The physics is real: stress around a hole in a plate under tension (the Kirsch solution, peak 3× nominal), and a slot aligned with the load (peak 1 + 2b/a, Inglis).
Change the part, and the drawing knows.
Every value on a Roshera drawing is re-measured on the solid. When the part changes and the sheet does not, the sheet stops being sound, and release is refused until it states what the part really is.
Ø40 H7main bore40.000…3× Ø13 H7mounting holes13.000…198.8overall length198.800…28.5boss height28.500…⌖ Ø0.05 | A | Bposition, B1–B30.031…R65outer arc65.000…



